
The 450mm, 240V, 1600W Quartz Halogen IR Lamp: Built for the Workshop
Let’s talk about a heat lamp that doesn’t mess around. We built this quartz halogen lamp to be a straightforward, no-nonsense radiant heater for industrial work. It runs on a standard 240V supply and cranks out 1600W of power. That means you can wire it straight into your plant’s electrical system without hunting down a step-up transformer. The 450mm tube length? That was a deliberate choice. It keeps the footprint tight while giving you enough radiating surface to pack a serious punch.
Why the 1600W at 240V Makes Sense
This setup is all about high power density. In plain terms, it heats up fast and responds instantly. If your process depends on precise temperature control, that immediate reaction is a big deal. It draws about 6.7 amps, so just make sure your wiring and controls are sized to match. And because it runs on 240V, you can plug it into the same industrial outlets you already use. No complicated rewiring. No extra cost. Just plug it in and get to work.
What’s Inside: The Quartz Halogen Build
Forget regular glass. This lamp uses a quartz envelope that can handle extreme heat and won’t crack under thermal shock. Inside, the halogen cycle keeps the filament strong, so the lamp doesn’t blacken and the output stays steady over its life. It emits shortwave infrared energy, which gets right to work—penetrating materials quickly and heating what you need, where you need it. No waiting. No wasted energy heating the air around the target.
Where It Shines (And What to Watch For)
This lamp is perfect for drying, curing, thermoforming, and heating components—any job where you need fast response and focused heat. The shortwave IR delivers intense heat in a small space. But here’s the catch: it runs hot. That intensity means you need proper thermal management. The equipment around it has to handle the radiant heat load. Pair the lamp with the right reflectors and guards to direct the heat where it should go and keep your team safe.
Installation and Keeping It Running
We fitted this lamp with an R7s base, so it drops right into compatible fixtures. When you’re installing it, handle the quartz tube with clean, dry gloves. It’s a simple step, but it prevents hot spots and keeps the lamp from dying early. You can expect thousands of hours of service. But if you’re running it nonstop, plan for regular replacements. This isn’t a delicate piece—it’s a workhorse built for the shop floor.
Quick Specs
- **Type:**Quartz Halogen IR Heat Lamp
- **Length:**450mm
- **Voltage:**240V
- **Power:**1600W
- **Base:**R7s
- **Output:**Shortwave Infrared (IR)